Antennas

This SCHWAIGER® SAT connection cable is designed for higher requirements in high-resolution image and sound transmissions. It is ideally suited for...

This SCHWAIGER® modem connection cable for self-install is designed for higher requirements with high-resolution image and sound transmissions. It ...

This SCHWAIGER® SAT connection cable is used to connect the satellite receiver to the SAT socket. This cable is shielded twice and is therefore les...

This SCHWAIGER® SAT connection cable is designed for higher requirements in high-resolution image and sound transmissions. It is ideally suited for...

The SCHWAIGER® DVB-T2 (T) outdoor antenna is suitable for terrestrial reception of digital television programs. The introduction of LTE as the stan...

The AINSTEIN antenna cable is used when connecting devices with IEC technology for high-resolution image and sound transmission (HDTV). The highly ...

The SCHWAIGER® 2-way distributor is designed for use in house distribution systems. Due to the direct current passage, the distributor is ideally s...

This SCHWAIGER® Indoor antenna with built-in amplifier is suitable for terrestrial reception of digital television and radio programs. The introduc...

This SCHWAIGER® antenna connection cable is suitable for antenna and cable TV installation. This cable is shielded twice and is therefore less susc...

The SCHWAIGER® lead roof hood is used as a universal roof cover and is suitable for all mast tubes with an outside diameter of up to 60 mm.

This SCHWAIGER® straight-through or junction box is suitable for use on single, community antenna and broadband cable systems. The box is designed ...

This SCHWAIGER® pass-through socket is suitable for use on single and communal antenna systems. The socket is designed as a through or end socket a...

This SCHWAIGER® pass-through socket is suitable for use on single and communal antenna systems. The socket is designed as a through or end socket a...

This SCHWAIGER® single socket is suitable for use on single and community antennas, broadband cable and satellite systems. The box can only be oper...

This SCHWAIGER® single socket is suitable for use on single, community antenna, broadband cable and satellite systems. With the special clamping te...

This SCHWAIGER® single socket set consists of a single or branch line socket, a surface-mounted box and a cover frame. The socket is suitable for u...

The SCHWAIGER® earthing strap clamp is suitable for fastening to a mast tube with a diameter of up to 60 mm. The antenna or satellite system is ear...

This SCHWAIGER® F-Quick adapter is used to connect or extend SAT connection cables with F connectors. The F-Quick connector is characterized by its...

This SCHWAIGER® F-Quick angle adapter is used to connect or extend SAT connection cables with F connectors. The F-Quick connector is characterized ...

This SCHWAIGER® complete set contains two F connectors, which are suitable for installation on a coaxial cable, and an F connector, which serves as...

This SCHWAIGER® complete set contains two F connectors, which are suitable for installation on a coaxial cable, and an F connector, which serves as...

This SCHWAIGER® complete set contains two F connectors, which are suitable for installation on a coaxial cable, and an F connector, which serves as...

This SCHWAIGER® connector serves as a coupling or intermediate piece to extend two SAT connection cables with F plugs.

This SCHWAIGER® connector serves as a coupling or intermediate piece to extend two SAT connection cables with F plugs.

The SCHWAIGER® F compression connector is suitable for coaxial cables with a diameter of approx. 7 mm (RG 6). The pressing technology guarantees a ...

This SCHWAIGER® IEC connector serves as a connection between the coaxial cable and the antenna socket. The robust plug is designed for many cable c...

This SCHWAIGER® sealing tape is designed for waterproof sealing of masts. The tape is strongly adhesive, self-amalgamating and can withstand temper...

This SCHWAIGER® mast isolator is used to attach an antenna cable to the mast tube. The elastic clamp insert also protects the cable from kinking.

The protection for the antenna mast! This SCHWAIGER® cover cap is designed as a termination for mast tubes up to 50 mm outside diameter and protect...

The protection for the antenna mast! This SCHWAIGER® cover cap is designed as a termination for a mast tube and thus protects the mast tube from in...

This SCHWAIGER® mast spacer can be used to compensate for offset fastening points in the roof beams. The mast is attached to the holder in such a w...

The SCHWAIGER® mast fastening clamp is designed for fastening the masts to both straight and sloping roof beams. It can also be mounted directly on...

This universal SCHWAIGER® mast mounting clamp is suitable for the twist-proof fixation of a mast tube with a diameter of max. 60 mm. It can be scre...

This SCHWAIGER® mast mounting clamp is suitable for mast tubes with a maximum diameter of 60 mm. It can be screwed directly to the wall or to a woo...

This SCHWAIGER® universal mast fastening clamp is designed to fix the mast tube or tube bracket to the wall or the rafter.

This SCHWAIGER® mast mounting set is specially designed for mounting the DVB-T antenna ANTERAS DTA 2000 and DTA 3000 outdoors. In addition to the m...

This SCHWAIGER® mast base stabilizes the antenna mast at a desired point, e.g. on a beam or on the ground. The assembly may only take place on stab...

This SCHWAIGER® PVC sleeve made of UV and weather-resistant material is designed for sealing roof hoods. This prevents the ingress of moisture.

This SCHWAIGER® double pipe clamp is suitable for the parallel assembly of 2 pipes. It consists of 2 identical parts.

This screw set can be used to attach the SCHWAIGER® wall bracket. It consists of 4 wood screws and washers.

This SCHWAIGER® IEC angled plug serves as a connection between the connection cable and the antenna socket. By using the angled connector, the cabl...

This SCHWAIGER® adapter is used to connect an antenna cable with an IEC plug to an antenna socket with an F socket, for example. For connecting ca...

This SCHWAIGER® adapter is used to connect an antenna connection cable with an IEC connector and a SAT connection cable with an F connector.  For ...

This SCHWAIGER® adapter is used to connect an antenna connection cable with an IEC socket and a SAT connection cable with an F connector. For conn...

This SCHWAIGER® cover frame can be mounted on junction boxes in conjunction with a cover plate. The cover plate is used to protect the connection t...

This SCHWAIGER® resistor is used to terminate unused outputs on multi-switches, taps and distributors. To terminate DC-free connections On multisw...

The SCHWAIGER® plug-in mast with a diameter of 42 mm is made of high-quality, corrosion-protected and hot-dip galvanized precision steel. Thanks to...